Product performance
1. The product has the characteristics of excellent air tightness, fire retardant and corrosion resistance;
2. The operation can be completed by a single person, very convenient.
3. The product has corrosion resistance, thermal insulation, durability, self-leveling and flame retardancy;
4. The product itself is halogen-free, does not contain toxic substances, and does not corrode or rust materials such as cables and metal plates.
Application
Cabinets: high and low voltage switch cabinets, box-type substations, cable branch boxes, ring network cabinets, central control cabinets, high-speed rail special box transformers, American box transformers, terminal boxes, wind power transformers, photovoltaic cabinets, mechanism operation boxes, Electric knife gate boxes, cable wells, charging piles, other electrical equipment and station buildings.
Wall holes: cable holes on the wall of the power distribution room, cables through the floor, mezzanine, bridge, through wall holes to construct the fire resistance wall in the cable tunnel trench, etc.
 |  |  |  |
Pre-construction Photo of Cooler Control Cabinet | After Construction Photo of Cooler Control Cabinet | Pre-construction Photo of Overhaul the Power Box | After construction Photo of Overhaul the Power Box |
 |  |  |  |
Pre-construction Photo of Fire Module Box | After construction Photo of Fire Module Box | Pre-construction Photo of Circuit Breaker Control Cabinet | After construction Photo of Circuit Breaker Control Cabinet |
 |  |  |  |
Pre-construction Photo of High Resistance Fan Control Cabinet | After construction Photo of High Resistance Fan Control Cabinet | Pre-construction Photo of Transformer Lower Wiring Box | After construction Photo of Transformer Lower Wiring Box |
 |  | ||
Pre-construction Photo of High-resistance Control Cabinet | After construction Photo of High-resistance Control Cabinet |
Technical data sheet
1. foaming type
No. | Test Items | Technical Requirements | Measured Values |
1 | Breakdown voltage，kv/mm | ≧2 | 2.2 |
2 | Dimensional stability-25℃ | ≦1% | 0.05 |
3 | Dimensional stability 100℃ | ≦1% | 0.04 |
4 | Thermal conductivity，w/m.k | —— | 0.5 |
5 | Corrosion with cable interface | 7d no corrosion, no rust | Qualified |
6 | Vertical combustion class | V0 | V0 |
7 | Oxygen index | ≧30% | 35 |
8 | Smoke Density Rating (SDR) | ≦75% | 75 |
9 | Water absorption | ≦3% | 2% |
10 | Fire resistance test | 1h | PASS |
11 | ROHS2.0 | Compliant | Compliant |
2. non-foaming type
No. | Test Items | Technical requirements | Measured values |
1 | Vertical combustion class | V-0 | V-0 |
2 | Electric strength，kv/mm | ＞20.0 | 23 |
3 | Surface resistance，Ω.cm | ＞1.0*1012 | 1.0*1013 |
4 | Volume resistance，Ω.cm | ＞1.0*1014 | 1.0*1014 |
5 | Water resistance（3 days at room temperature） | No swelling, no cracking | Qualified |
6 | Moisture resistance（45℃±5℃，90%±5%RH，60h） | No cracking, no pulverization | Qualified |
7 | Corrosion at the interface with the cable 7d（-20℃-200℃） | No corrosion, no rust | Qualified |
8 | Interfacial corrosion resistance with metal steel plate（-20℃-200℃） | ≥30days，no corrosion | Qualified |
9 | Thermal conductivity（23℃） | ＞0.03 | 0.05 |
10 | Shore hardness | —— | 52 |
11 | Withstand voltage（18KV，1min） | No breakdown | No breakdown |
12 | Appearance（100℃，24h） | There is no obvious change in the appearance of the sample | Compliant |
13 | Vertical combustion class（100℃，24h） | V-0 | V-0 |
14 | Appearance（-30℃，24h） | There is no obvious change in the appearance of the sample | Compliant |
15 | Vertical combustion class（-30℃，24h） | V-0 | V-0 |
16 | Curing time（20℃） | —— | 2.5h |
17 | High and low temperature resistance：≥7days | No swelling, no cracking | Qualified |
18 | ROHS2.0 | Compliant | Compliant |
